Timber Nailed Connection
(CSA O86-14)
v1.0.0
File:
Project:
Designer:
Date:

Connection Type

Single Shear
Double Shear


Note: For a double shear connection, the nails must pass through all three members. When double shear is checked, nail penetration is ignored in calculations.

Side Member(s)

Material:
Thickness:
mm
Width:
mm
Angle rel. to main mem.:
°
Side Member Overhang:
mm Note: 1)Only affects result when angle>0°. 2)Only used for nail spacing calcs. 3)Distance is measured along length of side member.

Main Member

Material:
Thickness:
mm
Width:
mm

Nails

Nail length:
in.
Nail diameter, dF:
mm
Number of Nails, nf:
*Optional
Jb:
Clinched
Jd:
Diaphragm Constr.

Load

Load on Connection:
kN *Optional

Conditions

Wood:
Service:
Treatment:
Load Duration:
waiting for input...

This information must be read or used in conjunction with the June 2017 reprint of CAN/CSA O86-14 Engineering Design in Wood.
In the event of discrepancies, CAN/CSA O86 shall govern.

© 2009–2024 Modulo Software Inc.
info Logged Out
close

You have been logged out of Jabacus at this location because you have signed in at another location.

Login
close